Intel Rapid Storage

Betriebssystem Installation auf einem RAID-Volume (F6 Install Methode)

In order to install an operating system onto a RAID volume, the RAID option must be enabled in the system BIOS, a RAID volume must be created, and the F6 installation method must be used to load the Intel® Rapid Storage Technology driver during operating system setup. Note! The F6 installation method is not required for Microsoft Windows7 or Microsoft Windows8

Enable RAID in System BIOS - RAID im System-BIOS aktivieren

Use the instructions included with your motherboard to enable RAID in the system BIOS.

1. Click F2 or Delete to enter the BIOS Setup program after the Power-On-Self-Test (POST) memory test begins.
2. Enter the Advanced menu.
3. Click the Storage Configuration menu.
4. Switch the SATA Operation Mode option to RAID.
5. Click F10 to save the BIOS settings and exit the BIOS Setup program.