Intel Rapid Storage: Unterschied zwischen den Versionen

Version vom 4. Juli 2014, 09:41 Uhr

How to install an operating system onto a RAID volume (F6 install method) - Betriebssystem Installation auf einem RAID-Volume (F6 Install Methode)

In order to install an operating system onto a RAID volume, the RAID option must be enabled in the system BIOS, a RAID volume must be created, and the F6 installation method must be used to load the Intel® Rapid Storage Technology driver during operating system setup. Note! The F6 installation method is not required for Microsoft Windows7 or Microsoft Windows8

Enable RAID in System BIOS - RAID im System-BIOS aktivieren

Use the instructions included with your motherboard to enable RAID in the system BIOS.

1. Click F2 or Delete to enter the BIOS Setup program after the Power-On-Self-Test (POST) memory test begins.
2. Enter the Advanced menu.
3. Click the Storage Configuration menu.
4. Switch the SATA Operation Mode option to RAID.
5. Click F10 to save the BIOS settings and exit the BIOS Setup program.

Create a RAID Volume - Raid Volume erstellen

Use the following steps to create a RAID volume.

1. When the Intel Rapid Storage Technology option ROM status screen appears during POST, press Ctrl and i at the same time to enter the option ROM user interface.
2. Select 1: Create RAID Volume and press Enter.
3. Use the up or down arrow keys to select the RAID level and press Enter.
4. Unless you have selected RAID 1, use the up or down arrow keys to select the strip size and press Enter.
5. Press Enter to select the physical disks.
6. Select the appropriate number of hard drives by using the up or down arrow keys to scroll through the list of hard drives and press Space to select the drive. When finished press Enter.
7. Select the volume size and press Enter.
8. Press Enter to create the volume.
9. At the prompt press Y to confirm volume creation.
10. Select 4: Exit and press Enter.
11. Press Y to confirm your exit.