56
Bearbeitungen
Änderungen
→Fehlerbeschreibungen
| Inverter voltage Low || 13 || x || Output voltage is under 200V || Check inverter driver board || Check the output voltage detection resistor R59,R61,R66,R71-76 on PSDR board
|-
| Inverter output short || 14 || [[Datei: Etrladezustand3.jpg|44px]] || Output short || Check loads short or not. ||
|-
| Battery voltage too high || 27 || [[Datei: Failure batt.png|44px]] || Battery voltage is over 14.2V/ 10mins or 14.4V /10sec || 1. Check battery connection. <br /> 2. CNTL detection circuit damage.(Replace) || Check the control board; <br /> Check the battery voltage detection resistor on PSDR board (R11,R12 for 1KVA, R11,R12, R46 for 2-3KVA)
|-
| Battery voltage too low || 28 || [[Datei: Failure batt.png|44px]] || Battery voltage is under 5V || 1. Check battery connection. <br /> 2. CNTL detection circuit
damage.(Replace) || Check the control board; <br /> Check the battery voltage detection resistor on PSDR board (R11,R12 for 1KVA, R11,R12, R46 for 2-3KVA)
|-
| Over temperature || 41 || x || UPS internal temp is over upper threshold 90degree. || 1. Check Fan <br />2.Check UPS Enviornment Operation Temp is over 45 degree.<br />3. Check NTC sensor ||
|-
| Over load || 43 || [[Datei: Etrladezustand2.jpg|44px]] || Overload. || Check loads is over UPS capacity. || If Load dection error, Check the output current detection resistor R62 and R65 on PSDR board
|-
| Charger failure || || C.H/ [[Datei:EtrWarnung.jpg|44px]] || || || Check the REC1,Q3,U3,F1 and D3 of charger module on PSDR board for standard mode;.<br />Check the REC1,Q2,U1,F1 and D2 on super charger board of 1KV back-up time mode; <br /> Check the REC1,Q2,Q4U1,F1 and D3 on super charger board of 2-3KV back-up time mode
|-
| ON/SELECT&OFF Button abnormal. || || || || || 1.Check the cable between control board and key board. <br /> 2.Check LCD board PCBA erosion.
